As an important component of the hydraulic system, the stability of the performance of hydraulic rubber hoses is crucial to the normal operation of the entire system. Effective maintenance and care can extend the service life of hoses, reduce the probability of faults, and ensure production safety. The maintenance and care of hydraulic rubber hoses mainly include daily inspection, correct installation, reasonable use, and regular replacement etc.
Daily inspection is an important means of detecting potential problems with hoses promptly. First of all, inspect the appearance of the hose and observe whether the outer rubber layer has any signs of wear, cracks, bulges, etc. Wear may be caused by friction with other components or scratches from external objects. Minor wear can be dealt with through protective measures, while severe wear requires the timely replacement of the hose. Cracks and blisters may be caused by excessive internal pressure, material aging, or manufacturing defects. Once discovered, they must be immediately stopped from use and replaced. Secondly, inspect the connection parts of the hose to ensure that the joints are well sealed and there is no leakage. Leakage not only leads to the waste of hydraulic oil but also may cause insufficient system pressure, affecting the normal operation of equipment. In addition, it is necessary to check whether the bending radius of the hose meets the requirements. Excessive bending will cause stress concentration inside the hose and reduce its service life.
Correct installation is the prerequisite for ensuring the normal operation of the hose. During the installation process, it is necessary to avoid twisting, stretching, and excessive bending of the hose. Twisted hoses will generate additional stress inside, accelerating the damage to the hose. Stretching will cause the length of the hose to exceed its rated range, reducing its pressure resistance performance. Excessive bending will cause damage to the reinforcing layer inside the hose. When installing, the direction of the hose should be reasonably planned according to the layout of the equipment to ensure that its bending radius is not less than the specified value. At the same time, appropriate joints and connection methods should be selected to ensure a firm connection and reliable sealing. When tightening the joint, it is important to apply moderate force to avoid deformation of the hose due to excessive tightness or leakage due to excessive looseness.
Proper use is the key to extending the service life of hoses. During the operation of the hydraulic system, the working pressure and temperature must be strictly controlled to avoid exceeding the rated working range of the hose. Excessively high pressure will subject the hose to excessive load, accelerating the damage of the reinforcing layer and the rubber layer. Excessively high temperatures can cause rubber materials to age and harden, reducing the flexibility and sealing performance of the hose. In addition, frequent pressure shocks in the hydraulic system should be avoided. Pressure shocks can generate instantaneous high pressure, causing fatigue damage to the hoses. During the start-up and shutdown of the equipment, the pressure should be adjusted slowly to minimize the impact of pressure fluctuations on the hose.
Regular replacement is an important measure to prevent hose failure. Although hydraulic rubber hoses have a certain service life, their actual lifespan may vary due to different usage environments and working conditions. Generally speaking, a reasonable replacement cycle should be formulated based on the usage frequency of the equipment, the working environment, and the manufacturer's recommendations. For hoses operating in harsh environments, such as high temperatures, high humidity, and strong corrosion, the replacement cycle should be appropriately shortened. When the hose reaches the specified service life or shows obvious signs of aging or damage, it should be replaced promptly to ensure the safe operation of the hydraulic system.






